Search results

the slop in the outputs is from the metal shaft having rounded the plastic journal it sits in, replacing the diff case (or the big trannsmission gear) will fix your slop, after a while of being rubbed friction has worn the plastic away a little

i have 1/10 ECX Ruckus i locked the slipper down as much as possible, the top shaft is spinning but the wheels are not so the problem must be in the gearbox somewhere, the problem with that is i got the new gear set and replaced all the gears even the ones inside the diff, off the ground with no...

so i found this esc https://www.ebay.com/p/?iid=131632031023&lpid=82&&&ul_noapp=true&chn=ps i need to know it wont burn up if i buy it you guys probably already know but its going in a stock 1:10 2wd ruckus but with a 3500kv motor and 3s 2200mah 25c battery anyone got any experience with this...

i use the gens ace 2200mah 25c 3s1p packs on my ruckus (stock except 3500kv motor, 60a bl esc, and of course the battery) and it will run my truck for for about an hour without getting excessively hot and i haven't had a single problem with them yet despite running for long periods of time in...

i found a castle sidewinder sct for an amazing deal but it has no fan but a place to put a fan does it have to have a fan to run? (if it does i still want it i just want to know if ill need to put a fan on) and i want your opinion on weather it would be the right choice for my truck

i also found a castle sidewinder sv2 (i have heard great things about this one that castle makes the best escs ever) but im scared because castle dont rate their products with amps and im using a battery only capable of 55 amps i would hate to buy a nice one like a castle just to have it burn up...

well i looked around and found this http://www.ebay.com/itm/like/301959895767?lpid=82&chn=ps&ul_noapp=true from the looks of it id say that the 60a goolrc esc was based on this (they share almost the exact same design) though im assuming that the hobbywing version is probably made with better...

well that's good to know now XD but i just bought 2 brand new 2200 mh 25c 3s batteries so i'm gonna go ahead and spend the extra $10-$20 and get something the new batteries wont ruin rather than replace my new batterys

thanks for the reply after a little research i discovered that the helicopter esc can only supply a burst current of 50a which is even lower than the recalled 40a esc that came with the truck so im gonna avoid it and the gool rc esc was being used with a 3s lipo but it is also brand new(got the...

i recently bought a 60a gool rc es and 3500kv motor the motor is great but the esc caught fire first day of running and the company refused to replace it although we later noticed the water seal was missing (its a "waterproof" model) and that is probably why it failed anyway i need a cheap temp...

i got my 1/10 ruckus december 25 of 2016 my esc fried weeks later (it was on recall so understandable) but then i tried to get my part replacement and got ignored for almost a month so i gave up on the replacement and bought a brand new 60a esc with motor hooked it up to find that my months old...

thanks, i looked at the turngiy gyro and i dont understand what it does as far as loosening the slipper i ran the truck for the first time this year yesterday and the clutch was getting really hot i figured it was from friction because the clutch was slipping so i had to tighten it more

i have a stx2 transmitter with a srx200 reciever but the spring in the steering wheel on the stx2 has broke and it makes it difficult to steer so i was wondering if i could just get a dx2e and bind it to my srx200 for now and if that would make it steer/drive any differently

my esc was the first part to go and my lipo battery was second so now i have a stock 2wd 1/10 ruckus with a 3500kv brushless motor 60a esc and 2200mah 3s 25c lipo the truck has noticeably a lot more power than stock so much that the wheels always slip taking off i read the book that came with...

so if i used the 60a gool rc esc for both a 3650 and 3660 3500kv motor would they produce similar torque ratings or would the 3660 have a higher torque?

i searched the whole forum and was amazed to find that this hasnt been asked yet what is the difference between 3650,3660,3670,3674 motors i know its the dimensions of the motors width and length in mm but what are the performance differences for instance if i have 4 motors, one of each size...

there are quite a few options depends on what you want your truck to do for off road/lots of turning you would want more torque over more speed in which case you would want a lower kv range on the other hand if you wanted it to be a fast straight driving vehicle (like drag racing) you would want...

i should have asked in the last post but do they make 6v fans that are less likely to overheat/burnout?

so i can just replace it with a cheap computer fan if it does burn up? is there a way i could bypass the fan? im pretty sure over heating shouldnt be a problem from what ive found the new motor and esc are more than sufficient for my use.

i have a newer 1/10 ruckus it came with a 15t motor, 1800mah 2s lipo, and 40a esc(i never got my recalled esc so it wasn't 60a)i bought a gool rc 3500kv 3650 and 60a brushless esc (i will eventually run it on 3s lipo since it is capable with the new motor/esc but for now will use the stock...