Search results

Casey, what kind of power?

MagnusGtr, when the truck is off the ground, as you stated, when you throttle up holding the truck, does the rear tires balloon at full throttle? If they do, you might have a slipper clutch issue or differential issue. If they don't, you might have a battery issue. What type of battery are you...

Poseidon2025, if you go to 14mm hex, on your AMP, you will have to go to 6mm axels. You can buy, online, 14mm hex with a 5mm bore to fit your stock axials.

Hows it working now.

DirtHead, the Hot Racing driveshafts are no longer available and I don't know why. I have them on a few of my RC's and they are awesome. I have used these, from RCAWD, and they seem to be working well. The only drawback is, you will only be able to use a 12- or 14-mm wheel hex wheel mount with...

dwblue00 sounds like it and looks like you have it all together.

Str8bashin. here is my Amp MT, fully modified to the max. This was my first RC and now, I have 36. I have about 10,000 dollars invested in this hobby, not to mention the parts, battery, tires, and motors on hand. I do make some of my own parts as needed, as I'm a retired machinist. It's a great...

Have you switched the ESC to LiPo battery?

If your running on the street, track, or dirt, without any jumps and turning the wheels and vehicle stays straight, then the servo is returning to center. I had to grind away some material from the servo cover as it was rubbing against the inside of the cover.

This is my RC workbench setup in my garage.

Windsordan, can you turn the tires when you turn the truck on?

Windsordan, can you turn the tires when you turn the truck on?

DirtHead, why are you going through so many CVD's. What car are you running and, is it stock? Also, where are the CVD's breaking?

Stay away from aluminum turn buckles as they easily bend with one bump or crash.

Definitely reverse the pinion gear.

Jakenew101, since you replace your spur gear with the Hot Racing hardened spur, you'll want to also use a Hot Racing hardened pinion gear or other brand. A hardened spur and and a mild steel pinion won't last very long. The harden steel will eat up the mild steel pinion.

Jakenew101, since you used the red loctite, if you need to remove that pinion, remove the motor first before using heat. This will keep you from accidentally melting any plastic. In the future, you can take a small hammer and put a small flat spot on the end of the set screw, this will make the...

Nice job Dave on the repair of those CV joints. I also have some of those CV's although I haven't had problems with them yet. Again, nice job and, thanks for the video's.

Changed all the suspension, front steering knuckels, rear knuckels, suspension arms, shocks cv rear drive axles to Hot Racing, Traxxas turnbuckels and Proline shocks.

Roy, no problem with a 2S battery. However, with a 3S you will need to raise the T holder, as you call it. If you just have a battery bed, then you will have to change the way you tie down the battery, with 3S. I myself use battery straps. Here's how I raised my platform on my Amp Crush, to...