Biggman100
Active Member
- Messages
- 33
I see a lot of posts saying to use the Traxxas Slash turnbuckles, but, never any links or part numbers, so, will these work: https://www.ebay.com/itm/3634424496...xmhnx7ZdPA%3D%3D|clp:2334524|tkp:BFBMttW87qVf
What are the stock lengths for the steering and suspension links? When i measured them, i came out at roughly 73MM for the front links, and 85MM for the steering links, so the links i linked i dont think would work for the steering. I would prefer links with plastic ends, since the aluminum ones i listed tend to not be as tight as i would like, but, i will use them if need be, if they will work. Will turnbuckles from any other vehicle work?
Now, about the RPM servo eliminator, anyone have issues getting the aluminum sleeves into them? The one i picked up it seems the holes where they go arent drilled big enough, unless im really not understanding how it goes together. In the pic, the two pieces circled in black are supposed to get pushed in where i circled it in red, but, unless i really force them, they will not go, and im concerned if i force them too hard, it will break it.
What are the stock lengths for the steering and suspension links? When i measured them, i came out at roughly 73MM for the front links, and 85MM for the steering links, so the links i linked i dont think would work for the steering. I would prefer links with plastic ends, since the aluminum ones i listed tend to not be as tight as i would like, but, i will use them if need be, if they will work. Will turnbuckles from any other vehicle work?
Now, about the RPM servo eliminator, anyone have issues getting the aluminum sleeves into them? The one i picked up it seems the holes where they go arent drilled big enough, unless im really not understanding how it goes together. In the pic, the two pieces circled in black are supposed to get pushed in where i circled it in red, but, unless i really force them, they will not go, and im concerned if i force them too hard, it will break it.