Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Looking for one of these as a stop gap until my metal ones arrive.
I've mashed mine up and need a quick replacement, any usable one will do.
Thanks
Thanks for the reply, so your recommendation would be to go for a 36p setup? I hadn't considered that, what's the advantage of the lower pitch?I am assuming its 48p... I would just buy a lower pitch... I fought with those 87T gears forever... Ive got 10 stripped ones, metal and plastic...
This is not a direct answer but it may save some money in the future.
Good luck!
Thanks for the reply, so your recommendation would be to go for a 36p setup? I hadn't considered that, what's the advantage of the lower pitch?
What motors were your running that stripped so many gears?
I would recommend 32p setup only because they shouldn't break and there is a lot of availability...Lower pitch means bigger teeth therefore they wont strip so easily.
I stripped my gears (48p) with a TAZER 3300kv and a Fuze 3800kv on nimh. Theses motors/batteries shouldn't have stripped them...it was ridiculous.
If you're stripping gears that much chances are you're not setting your gear mesh properly, or making sure your motor is mounted tight enough.
I've run the 48 pitch gears on a number of brushless systems and in 4 years only stripped a few of them due to me being new, and not setting my mesh properly, or having a fluke accident where the motor was hit hard enough to move slightly and end up wrecking the gears by throwing off the mesh.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest ECX RC community for RC enthusiasts that covers all aspects of the ECX brand!
Register Today It's free! This box will disappear once registered!