Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
I am trying to do this for my daughters AMP but have found the gear cover won’t fit due to the shaft of the motor being too long. Is there a gear cover that will fit?When I finally smoked the stock motor, I put a Traxxas Titan 12 turn motor in the truck and it gave it a considerable jump in torque and speed on 2s lipo. It's not going to be as fast as a brushless system, but it definitely gave it more speed
I think you can just drill a hole (diameter of the shaft) in to the coverI am trying to do this for my daughters AMP but have found the gear cover won’t fit due to the shaft of the motor being too long. Is there a gear cover that will fit?
This is exactly what I didI think you can just drill a hole (diameter of the shaft) in to the cover
Just wondering, came across your post here. I recently also replaced the stock motor in my son's AMP with a Titan 12T 550 motor. It only ran for a short while before the ESC burned up. I not only upgraded the motor, but also went to a 8.4V 7-cell battery. I'm wondering if you stayed with the 7.2V 6-cell battery setup. Did I make a mistake by increasing battery at the same time I changed to the 12T 550 motor?This is exactly what I did
Just wondering, came across your post here. I recently also replaced the stock motor in my son's AMP with a Titan 12T 550 motor. It only ran for a short while before the ESC burned up. I not only upgraded the motor, but also went to a 8.4V 7-cell battery. I'm wondering if you stayed with the 7.2V 6-cell battery setup. Did I make a mistake by increasing battery at the same time I changed to the 12T 550 motor?
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest ECX RC community for RC enthusiasts that covers all aspects of the ECX brand!
Register Today It's free! This box will disappear once registered!