Batone76
Well-Known Member
- Messages
- 136
Anything particular i should be looking for or sound to know if its good positionStart with one full turn off. If that is too much still go in 1/4 turn increments.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Anything particular i should be looking for or sound to know if its good positionStart with one full turn off. If that is too much still go in 1/4 turn increments.
Start with one full turn off. If that is too much still go in 1/4 turn increments.
Prob should watch the ecx video on how to adjust your slipper clutch.Anything particular i should be looking for or sound to know if its good position
Like I said I can make it flip over if I cut the wheel hard at full speed (without the brake turn). So increasing turning speed or angle will only pronounce that issue more. But then again I am on a stock brushless ruckus with 2s 30c lipo. I am not sure which setup you have in your 4wd torment.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest ECX RC community for RC enthusiasts that covers all aspects of the ECX brand!
Register Today It's free! This box will disappear once registered!