gears

I have an ECX circuit 2wd and I'm looking to upgrade by pinion and spur. Currently I'm running the stock 87t spur and a 21t pinion I bought from Hot Racing. I would like to swap my pinion to a 26t but I don't know what size spur to upgrade to. What size spur is safe and how should i go about...

I’ve picked up my ecx amp (mt) that I stopped using about 1 year and a half and it makes a clicking noise when accelerating ( I’ll post a video when I have time ). I’ve replaced the gears so they are not an issue and I’ve replaced the spur gear. Could the issue be the case being worn because the...

Relatively new Amp MT is making a noise each revolution. Seems like a click or scrape. Pulled the wheels off and then the cover over the ring and slipper clutch. Pinion and ring gear look fine. Motor is not making the noise. With motor stopped if I turn one wheel and the other turns I don’t hear...

I have a 1/10 brushed 2wd Ruckus. I just put a 4000kv tazer brushles combo in. I know the gears will break soon. But what is the best adjustments i can make so that the gears last the longest?

New to SCT trucks just ordered a 4300kv brushless for the Torment. Do I need to change spur or pinion. Any suggestions. Did order metal trans gears and upgraded drive shafts also in case they twist

Okay I'm new to this and would greatly appreciate some help. I upgraded my 2wd Ruckus Monster truck motor and ESC to the 1/10 four pole 3000kv. First run strip metal gears in differential. I took it apart and replaced it with the plastic gears that were in it the beginning. Run it about 5...

Im new to the world of rc cars and bought a ECX CIRCUIT 1/10 2WD, can anyone suggest any performance, speed, battery etc upgrades and the best or cheapest place to order them Many thanks in advance

My son has a stock torment. It looks like he has stripped the gears. When he gives it gas the wheels turn some but only if the rear is off the ground. What do you recommend for a metal gears. Thanks.

So I recently updated my gearing to the Ecx Metal gears. And I don't know if it's just me but is it supposed to make a clank sound when stopping and braking and slowly starting off? Should I put a grease on them?

So I've recently upgraded to a 2150kv Brushless motor, with an 80amp ESC. Evrything runs good and works perfect, except for the clutch. I have the hex nut maxed out in tightness, but yet it still slips. You cant punch the throttle without it slipping. But i can ease into top speed. Im really...

Hey, for some reason I stripped 2 spur gears really, really fast. After replacing the new one, the mesh was good I believe at least, very little wobble and I could feel each groove. Then I did one run and looked at it, 1/3 of the spur gear was shredded, that's what caused the clicking noise...

How do you tell when the slipper clutch needs adjusted?

If I drive my ECX AMP very fast and suddenly brake (e.g to stop hitting a curb or a lamp post) does that damage the spur gear? Thanks in advance

is it even possible to convert a ruckus to 5mm pinion gearing? would it fit? or would there be a lot of modding involved?

Hey guys, I've been battling an issue for a little while now and I was wondering if anybody had some thoughts on the matter. I'm experiencing some decent overheating issues on my Kinexsis 4000Kv motor (heres the link...

I keep cracking metal gears in my ruckus. I run plastic spur 48p to 15t pinion 3000kv 3s. Metal shafts. I have steel gears ordered. Should I try running a plastic diff to try and make a different weak spot.

Are there any steel idler gears the would fit in the ruckus I always crack them. My plastic spur won't give from these bad crashes.

I just put in new metal gears and spur new esc and brushless motor set everything up made 2 passes up and down street now my ruckus will not go when tires are touching the ground also put new slipper in and so took everything back apart and nothing is broke motor and esc never even got warm...

So I have a circuit and a ruckus 2wd on both, has stock 87 tooth spur gear, i have put a 3650 3500kv in the ruckus with the stock 18 tooth pinion the truck just chugs and will not move, i was hoping you could help with gearing I think it is a gearing issue as it seems as i need more torque since...

Alright so I got everything in to the ruckus 4x4. Mod 1 gears. With a castle creation motor but it clicks on acceleration and breaking worried something is wrong. Any ideas?